Industrial Lifting Door Motor for Sectional Door Systems

Industrial Sectional door and motor

Industrial Lifting Door Motor for Sectional Door Systems

  • 4 Versatile Lifting Configurations: Seamlessly adapts to Vertical, Inclined, Standard, and High-Lift door layouts based on available building headroom.

  • Precision Electronic Limit & 30,000-Cycle Durability: Delivers smooth travel positioning with a long-service lifespan built for high-frequency logistics and factory environments.

  • Spring-Free Installation & Labor Savings: Eliminates complex torsion spring setups, cutting installation labor costs by over 70% and removing ongoing spring maintenance.

  • 100 kg to 170 kg Door Capacity: Available in 83 N·m (300W) and 141 N·m (400W) models to power various standard and heavy-duty sectional overhead doors.

Request a Quote
Share:

Sectional Door Drive Innovation

Industrial Lifting Door Motor for Sectional Door Systems

Motorized Drive with Electronic Limit Control for Up to 170 kg Sectional & Overhead Doors

4 Lifting Configurations
Electronic Limit Control
Spring-Free Installation
30,000 Operating Cycles

This industrial lifting door motor is developed for motorized sectional door systems used in factories, warehouses, logistics centers, workshops and commercial facilities. The drive system provides controlled door movement for different lifting configurations while reducing the mechanical work normally required around the door lifting mechanism.

Two motor configurations are available for doors up to 100 kg and 170 kg, with electronic limit control and a rated output speed of 15 r/min. The system can be matched with vertical, inclined, standard and high-lift door arrangements, giving door manufacturers and project contractors more flexibility during installation.

For commercial and industrial door projects, the motor can also help reduce installation work and routine mechanical maintenance compared with conventional lifting arrangements.

Four Lifting Configurations for Different Door Layouts

Industrial sectional doors do not always have the same headroom or ceiling structure. This motor system supports four common lifting configurations, allowing the drive to be selected according to the actual door installation:

01

Vertical Lifting

Suitable when the available headroom above the door opening is equal to or greater than the door height. The door moves upward along a vertical path, ideal for buildings with sufficient overhead clearance.

02

Inclined Lifting

Used where the ceiling or roof structure follows a slope. The available inclined space is approximately equal to the height of the door opening, allowing the door to follow the building’s slope.

03

Standard Lifting

Commonly used where the available headroom is approximately 350–500 mm. This configuration provides a practical arrangement for many conventional industrial sectional door installations.

04

High Lift

Intended for applications where available headroom is more than 500 mm but less than the door opening height. It allows the sectional door to travel higher before moving along the overhead track section.

* Selecting the lifting configuration before installation helps ensure that the motor, winding wheel and door mechanism are properly matched to the building structure.

Motor Models & Electronic Limit Control

Model 100 (JMJ83DL-1P)

Door Weight: Up to 100 kg

Features an output torque of 83 N·m and rated power of 300 W. Operates at 220V/50Hz with 15 r/min output speed and 165 mm winding wheel diameter. Ideal for standard industrial sectional doors.

Model 170 (JMJ141DL-1P)

Door Weight: Up to 170 kg

Features an output torque of 141 N·m and rated power of 400 W. Designed for heavier sectional doors, providing reliable vertical lifting with identical winding wheel dimensions (165 mm diameter).

Precision Electronic Limit Control & Cycle Performance

The system uses an electronic limit rather than a conventional mechanical limit arrangement, allowing the motorized door system to control opening and closing positions smoothly according to the configured travel range.

With an opening speed of approximately 129 mm/s, the system is specified for up to 30,000 operating cycles with a 2-year warranty. Its operating cycle capability can reach approximately 4–10 times that of ordinary commercial roller shutter motors, making it highly suitable for frequent operation in logistics hubs and production facilities.

Spring-Free Installation Benefits

By eliminating the need for a conventional torsion spring assembly around the lifting mechanism, this drive system simplifies site work and improves installation efficiency:

> 70%

Labor Cost Savings

Significant savings in site installation labor costs by removing complex spring setup work.

> 50%

Efficiency Improvement

Faster project completion time with straightforward motor and lifting bracket integration.

Simplified Structure

Reduces mechanical complexity around the lifting mechanism for cleaner aesthetic and space utilization.

Zero Spring Maintenance

Eliminates periodic spring tension adjustment, inspection and replacement costs over the door’s service life.

Technical Specifications

Parameter Model 100 Model 170
Model Code JMJ83DL-1P JMJ141DL-1P
Execution Standard DB 35/T 1111-2019 DB 35/T 1111-2019
Insulation Class F F
Rated Voltage / Frequency 220 V / 50 Hz 220 V / 50 Hz
Rated Current 3 A 4 A
Rated Power 300 W 400 W
Output Torque 83 N·m 141 N·m
Output Speed 15 r/min 15 r/min
Winding Wheel Winding Diameter 165 mm 165 mm
Winding Wheel Inner Diameter 141 mm 141 mm
Suggested Door Weight Up to 100 kg Up to 170 kg
Opening Speed 129 mm/s 129 mm/s
Limit System Electronic Limit Electronic Limit

Applications for Industrial and Commercial Doors

This industrial lifting door motor can be used with sectional and overhead door systems in a range of commercial and industrial environments:

■ Industrial workshops
■ Warehouses & storage
■ Logistics centers
■ Factory entrances
■ Commercial garages
■ Distribution facilities
■ Commercial overhead projects
■ Industrial access buildings

Industrial Sectional Door Motor for OEM and Project Supply

For OEM door manufacturers, system integrators and industrial door contractors, motor selection should start with actual door specifications rather than motor power alone.

When requesting a motor configuration, please provide:

■ Door dimensions: Width × Height & panel construction
■ Door weight: Up to 100 kg or 170 kg
■ Lifting method: Vertical, Inclined, Standard or High Lift
■ Operating requirements: Speed & daily operating frequency
■ Power supply: Local voltage and frequency

Based on these parameters, our engineering team will help select the ideal motor model and lifting configuration for your project.

Inquiry

Interested in "Industrial Lifting Door Motor for Sectional Door Systems"? Fill out the form below and our team will get back to you shortly.

The inquiry form is not configured yet. Please set the Contact Form 7 form ID in Brand Settings and install the CF7 plugin.